Put baking soda in the trash can and 9 other tips to keep the bathroom shining

The bathroom is one of the most important and functional environments of our homes. Keeping it clean and disinfected is essential not only for an aesthetic issue, but also for health.

Below we suggest tips that will help you keep the bathroom constantly clean and shiny quickly and easily.
1. Deep cleaning of the WC

There is a myriad of cleaning products dedicated to the toilet. However, a simple solution made from white vinegar and baking soda in equal parts and the juice of a lemon is the perfect ally for a deep cleaning of the cabinet.

Apply this solution by helping you with the fuck and let it act for at least 15 minutes. Be sure to rub well on the edges and rinse with plenty of water.
2. Cleaning the toilet purpose

A very useful tool to keep the toilet clean, but which in turn needs a deep cleaning to avoid the accumulation of residues and bacteria.

Put it in the toilet and flush it to rinse it with clean water, then soak it in a solution consisting of hot water, liquid detergent, 50 grams of baking soda, 1 tablespoon of salt and a glass of vinegar. After 5 minutes you can remove it and rinse it again.
3. Clean the faucet diffuser

Over time in the faucet diffuser, minerals and limescale present in the water can accumulate, thus reducing the power of the water jet.

Put some white vinegar in a plastic sachet and soak the entire upper part of the faucet. Fix the sachet with a lace and wait about an hour before removing it. This method also applies to the shower head, for which you will need to use a larger envelope.
4. Clean the bathtub

To recover the white and bright color of the tank mix 4 liters of hot water with 250 ml of white vinegar, 250 ml of alcohol and 80 grams of baking soda.

Pour this solution on the walls of the bathtub and rub with a sponge. After 15 minutes rinse with plenty of cold water.
5. Remove the mold from the tiles

The humidity and heat of the bath cause the formation and diffusion of fungi on less ventilated areas, such as tile joints.

To remove the mold from the tiles just spray the vinegar and let it act for 15 minutes, then rub with a sponge and rinse. Make sure the bathroom is ventilated to prevent mold formation.
continued on next page